Battery Charger 7 Stage Splash Proof 12v 6amp
#PTC12V6A7S
Only $129.00
ADD TO CART
Limited stock remaining. Order now before it runs out!
Details
This PTC12V6A7S charger is a sophisticated IP65 water-resistant 7 stage charger, utilizing switch mode and fully automatic computer system control, designed to charge most 12 volt Gel, Lead Acid and Calcium batteries.
Features and benefits:
• Heavy duty design
• Fully automatic 7 stage charging
• Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimizes temperature – prolong battery life
• IP65, CE, EMC, SAA and C-TICK Approved, making it ideal for automotive & marine situations.
• Compatible with GEL, Calcium, Deep Cycle and conventional lead-acid batteries.
• Internal charger temperature monitoring and control
• Battery type selector switch with LED battery type indicators
• Inbuilt battery testing with ‘faulty battery’ indicator
• Charging state LED indicators
• Zero volt minimum battery start up – can charging a completely flat battery
• Over charging, Reverse polarity, short circuit and over temperature protection
Input voltage: 230VAC /50HZ; Type: 7 Stage Pulse; Approval: IP65, CE, EMC, SAA and C-TICK
Default battery type: Lead Acid; Protections:Over charging, reverse polarity (Flashing LED), short circuit and over temperature
Minimum start voltage: =0V, Operating temperature: -15? — +40?, Maximum charging current: 6A
Charging voltage:
GEL LEAD ACID CALCIUM
Charging 14.3V 14.8V 15.6V
Boost 14.8V 15.2V 16.2V
Float 13.3V 13.7V 13.7V
Features and benefits:
• Heavy duty design
• Fully automatic 7 stage charging
• Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimizes temperature – prolong battery life
• IP65, CE, EMC, SAA and C-TICK Approved, making it ideal for automotive & marine situations.
• Compatible with GEL, Calcium, Deep Cycle and conventional lead-acid batteries.
• Internal charger temperature monitoring and control
• Battery type selector switch with LED battery type indicators
• Inbuilt battery testing with ‘faulty battery’ indicator
• Charging state LED indicators
• Zero volt minimum battery start up – can charging a completely flat battery
• Over charging, Reverse polarity, short circuit and over temperature protection
Input voltage: 230VAC /50HZ; Type: 7 Stage Pulse; Approval: IP65, CE, EMC, SAA and C-TICK
Default battery type: Lead Acid; Protections:Over charging, reverse polarity (Flashing LED), short circuit and over temperature
Minimum start voltage: =0V, Operating temperature: -15? — +40?, Maximum charging current: 6A
Charging voltage:
GEL LEAD ACID CALCIUM
Charging 14.3V 14.8V 15.6V
Boost 14.8V 15.2V 16.2V
Float 13.3V 13.7V 13.7V